Grass Valley 1200 Operation Manual - Manual (Page 135)

3-89
Disk Menus
Figure 3-45. Disk Load Menu
Load Configuration and Load All
The [LOAD MKD CFG] function allows you to download from disk
the marked switcher configuration into the switcher to become
the current configuration.
The [LOAD ALL] function allows you to mark any E-MEM register
file in the listed directory. Pressing the [LOAD ALL] menu button
will load all E-MEM files that have the same base name (the base
name is the characters before the extension). Only one E-MEM
register base name should be marked; if more than one is marked
you will receive an error message.
NOTE: In the [LOAD ALL] function, although only one register file
needs to be marked to load all the similar base name registers, more than
one file can be marked if desired. However, make sure all base names
selected are the same, or an error message will appear.
DISK LOAD MENU
CHANGE
DIR
LIST
DIR
MARK
FILE
LOAD
MKD REGS
LOAD
MKD CFG
LOAD
ALL
DELETE
MARKED
FILE
SELECT
Exit
Volume label:
A:\
FILENAME SIZE DATE TIME
••
REGISTER.R00 765 11-MAY-94 8:35 AM
REGISTER.R01 765 11-MAY-94 8:35 AM
REGISTER.R02 765 11-MAY-94 8:35 AM
CONFIG.CFG 5550 1-JAN-94 2:06 PM
MINE.CFG 5550 20-OCT-93 4:15 PM
DCTALK
COOL.R00 765 14-JULY-94 7:07 PM
DCTALK
PARIS
1.2 Mbytes available