Outputs menu, Outputs menu -22, Figure 2-12 – Grass Valley 1200 Operation Manual User Manual
Page 40
2-22
Section 2— Startup
Outputs Menu
From the Configuration menu, select
[OUTPUTS>]
to display the
Outputs menu (Figure 2-12). This menu allows you to set up
signal formats for Model 1200 outputs.
1.
Use the
(OUTPUT)
soft knob to highlight the name of the
output to be configured.
2.
Use the
[BITS RES]
soft button to select either 8 or 10 bits to
match the bit resolution of your output destination.
3.
Use the
[SHAPING]
soft button to turn shaping
ON
or
OFF
for that output. Shaping
ON
produces a video output shaped
by the key signal and matted over black. (Shaping for the
Program and Preview DAC outputs follows the Program 1/2
or Clean Feed output shaping selection.)
4.
Use the
[SIGNAL SOURCE]
to select either
CLEAN
(clean
feed; video with no key) or
PROGRAM
(video with key).
Figure 2-12. Outputs Menu
OUTPUTS MENU
10
BITS
RES
SHAPING
8
OUTPUT
OUTPUT NAME
BITS
RES
SHAPING
SIGNAL
SOURCE
PROGRAM 1
10
OFF
PROGRAM 2
PREVIEW
CLEAN FEED
KEY OUT 1
10
OFF
PROGRAM
10
ON
10
ON
OFF
KEY OUT 2
AUX 1
AUX 2
8
10
10
10
ON
ON
CLEAN
Exit
PREVIEW DAC
-
OFF
PROGRAM
-
-
-
-
-
-
ON
CLEAN
PROGRAM
SIGNAL
SOURCE
PROGRAM DAC
-
OFF
PROGRAM