Grass Valley Jupiter v.1.0 - Manual (Page 99)

Jupiter L-S Series Control Panels Installation and Operating Manual 99
SXY Control Panel
3. Rotate the selector knob to choose Override? and press Select . The Preset
window will display the names of overrides for that panel.
4. Use the selector knob to scroll through and select the desired override.
5. Press Take to execute the override.
6. Press Clear to leave the menu selection and return to normal operation.
Scroll Take Mode
In Scroll Take mode, turning the selector knob switches the listed sources
to the destination as they scroll. Scroll Take mode is indicated by the
Select
button blinking green.
1. Press Select . The display windows will display various modes.
2. Rotate the selector knob to Panel Config? and press Select .
3. Scroll to Scroll Take . Its current status will be reported (-ON- or -OFF-).
4. Press Select to turn Scroll Take ON or OFF.
The panel exits Config Mode and operates in the new Scroll Take mode.
Note When Scroll Take is active, it is still possible to pre-select a source with the
Category buttons, and then use the Take button to switch that source to the
destination.
Front-Panel Service Modes
These modes are provided for panel maintenance and troubleshooting.
They are not normally used by the operator.
• Panel Info Mode is described on page 105 .
• Panel Setup Mode is described on page 106 .