Grass Valley Jupiter v.1.0 - Manual (Page 88)

88 Jupiter L-S Series Control Panels Installation and Operating Manual
Section 5 — L-S Series Panel Operation
Basic Operation
With all available levels toggled ON (high amber), press a source button
(light green). Selecting the source completes the switch to the destination.
Breakaway Switching
Select only the level button(s) on the right that you wish to switch before
selecting a source.
Note If a level button cannot be toggled ON, the level may not exist on that desti-
nation (e.g., audio on a video monitor).
2/3/4 Destinations / 4 Levels
With two, three, or four destinations defined, the top row of the eight-
button cluster is used for breakaway switching of the first four levels, and
the bottom row of four buttons is used to select from up to four destina-
tions. An example is shown in
Figure 35 .
Figure 35. S25
4 Levels Sources
4 Destinations
Configured for 4 Levels / 4 Destinations
Operation
1. Select the destination button on the lower right you wish to control.
2. For a breakaway, select the level button(s) on the upper right for the
levels you wish to switch.
Note If the level button cannot be toggled ON, the level may not exist on that des-
tination (e.g., audio on a video monitor).
3. Press a source button (light green). Selecting the source completes the
switch to the destination.
5/6/7/8 Destinations
With five, six, seven, or eight destinations defined, the eight-button cluster
on the right is used to select the destination. Breakaway switching is not
available with this configuration. An example is shown in
Figure 36 .