Grass Valley Jupiter v.1.0 - Manual (Page 90)

90 Jupiter L-S Series Control Panels Installation and Operating Manual
Section 5 — L-S Series Panel Operation
S100 Control Panel
For a summary of S100 functions see page 26 .
Figure 37. S100
Protect/
Lock
Panel
ID
Control Panel
L64 Panel Similarities and Differences
The S100 panel layout and operating procedures are nearly identical to the
L64 panel.
Significant differences include:
• One hundred assignable buttons instead of 64.
• Salvo , Dest , and Source buttons, which give direct access to the menus
used to select these items.
• Assign & Select button, also used to directly access button assignment
menus.
• The button used to protect and lock destinations is labeled Lock instead
Lock/Protect .
• The S100 panel does not have an Undo button.
• Alternate Mode operation (unique to the S100 L-S panel).
• Multi Destination mode operation (unique to the S100 L-S panel).
Basic S100 Operation
Refer to the following L64 procedures, which also apply to the S100 panel.
The only differences for S100 operations involves accessing menus. If you
wish, you can use the S100 panel’s
Salvo , Dest , Source , and Assign & Select
buttons instead of the L64 panel’s Menu and Up/Down arrow buttons.
• Show Button Assignment on page 59
• Clearing Panel Modes on page 60
• Destination and Source Selection Methods on page 60
• Protecting a Destination on page 62