Grass Valley Jupiter v.1.0 - Manual (Page 44)

44 Jupiter L-S Series Control Panels Installation and Operating Manual
Section 3 — Software Installation & IP Addresses
Multi-Network IP Configuration
A “remote” L-S panel can be placed on a network separate from the other
Jupiter devices. For example, on a facility LAN. In
Figure 24 , an IP router
serves as a gateway between two networks.
Figure 24. LAN Addressing With Remote L-S Panel Example
CM-4000 System Controller
10/100baseT
Jupiter LAN
IP switch
Panel IP
192.168.253.102 Panel ID
02
Panel IP
192.168.253.101 Panel ID
01
NOTE: 64 Panels per CM maximum
Panel IP
192.168.253.103 Panel ID
03
Jupiter
File Server IP
192.168.253.1
IP
192.168.253.10
8536_17r1
Remote L-S panel
Gateway
Facility LAN
IP
192.168.1.1
Remote Panel IP:
192.168.1.164”
Gateway:
192.168.1.1 Panel ID
64
Configuration is similar to that just described, except that the address of the
gateway must be entered on the web page for the remote panel.
For more information on IP addressing, see the Jupiter CM-4000 Installation
and Operating Manual.
Network Configuration Procedure (NetConfig)
The network configuration procedure requires the Grass Valley NetConfig
application v2.0.9 or newer. NetConfig is supplied on the CD shipped with
the panel (see
NetConfig Installation on page 40 ).