Grass Valley Jupiter v.1.0 - Manual (Page 32)

32 Jupiter L-S Series Control Panels Installation and Operating Manual
Section 2 — Hardware Installation
All power modules are auto-sensing (120-240 VAC, 50-60 Hz) and are sup-
plied with a mains power cable appropriate for the user’s geographic loca-
tion. No power switch is present. The AC cord is disconnected to power
down the panel.
WARNING Do not connect any external power supply other than the approved “JUP-
DCPS” unit supplied by Thomson Grass Valley.
The AC power supply is contained in a module that mounts on the rear of
the panel (
Figure 10 ).
Figure 10. Control Panel Dimensions with Options
8536_37
8536_37