Grass Valley Jupiter v.1.0 - Manual (Page 77)

Jupiter L-S Series Control Panels Installation and Operating Manual 77
LD4 Control Panel
Sequence (Salvo) Switching (LD4 Panel)
Pre-built Jupiter sequences can be executed after they have been created
and downloaded (see
Setting Up a Salvo with a Sequence Set on page 52 ).
1. Press Menu , use the Up/Down arrow buttons to display Sequence? in the D1
window and press its soft button.
2. Sequences will appear in groups of four, in white, in the display
windows. Use the
Up/Down arrow buttons to scroll to the additional
sequences.
3. Press the soft key for the desired sequence. The number of the preset
sequence will appear in the Status window.
4. Press Take to execute the sequence.
Front-Panel Service Modes
These modes are provided for panel maintenance and troubleshooting.
They are not normally used by the operator.
• Panel Info Mode is described on page 105 .
• Panel Setup Mode is described on page 106 .