Grass Valley Jupiter v.1.0 - Manual (Page 31)

Jupiter L-S Series Control Panels Installation and Operating Manual 31
Section
2
Hardware Installation
This section describes hardware installation procedures for the L-S series
hardware panels.
Rack Mounting
Jupiter L-S panels mount into a standard 19 in. equipment rack. Panels are
1 or 2 rack units high (
Figure 9 ).
Figure 9. Panel Rack Mounting
8536_43
44 mm
1.75 in.
88 mm
3.5 in.
432 mm
17 in. 483 mm
19 in.
2 RU Panel
1 RU Panel
See Specifications on page 101 for dimensions for each type of L-S panel.
Power Supplies
Two methods are available for powering the L-S series hardware panels:
• AC power supply (JUP-ACPS)
• DC power supply (JUP-DCPS)
The module used is specified at the time of order.