Grass Valley Jupiter v.1.0 - Manual (Page 69)

Jupiter L-S Series Control Panels Installation and Operating Manual 69
LD4 Control Panel
LD4 Control Panel
For a summary of LD4 functions see page 23 .
Figure 30. LD4 Control Panel
LD4 Operating Modes
The LD4 has two distinct operating modes, single destination and multiple
destination.
• When operated in single destination mode, one destination is selected
for control and the display windows show the source for each defined
level of that destination (video, left audio, right audio, etc.). Breakaway
switching is supported.
• When operated in multiple destination mode, the LD16 can be used to
control multiple destinations, with the names of 4 of those destinations
(and the primary source for each) on display simultaneously. Multiple
destinations can be switched to the same source with a single Take.
Breakaway switching is not supported in this mode (except via Over-
rides).
LD4 Single Destination Mode
In single destination mode, windows D1-D4 show the status for each level
of one selected destination. The name of the currently controlled destina-
tion is shown in the Destination window.
Entering Single Destination Mode
1. Press Menu . The display windows will display various modes and the
associated active soft buttons will illuminate.
2. Press the D1 window Single Destination? soft button. Single destination
mode will be selected and the panel will exit the menu mode.
The active destination is shown in the Destination window. The level
names appear, in amber, in the D1-D4 windows. If more than 4 levels exist,
pressing the
Up/Down arrow buttons will page through the additional levels.
The Status window will report All Levels , or the highest numbered level that
is currently selected.