Grass Valley Jupiter v.1.0 - Manual (Page 56)

56 Jupiter L-S Series Control Panels Installation and Operating Manual
Section 5 — L-S Series Panel Operation
Preset/Level
Typically reports the name of the source or destination selected for the next
action, and the currently selected level.
D1 - D16
Reports an individual destination name, and its current source, or reports
the levels and sources for a single destination, depending on panel oper-
ating mode.
Use of Color
The L-S panel buttons have color capabilities (green, yellow, red, and
amber in low tally dim or high tally bright intensities). Specifically, the
buttons use color to indicate the following functionality:
Table 2. Colors and Functions for Buttons
Button Color Function
Green Sources
Yellow Destinations
Red Lock
Amber Levels and other functions such as sequences, overrides etc.
Color bitmap displays available on all L-S panels (except S25 and S50) are
176 x 132 resolution with 65536 colors, and can display up to 6 lines of 12
characters. In addition to the button colors listed above, these RGB displays
use the following colors to indicate:
Table 3. Color and Function for Menus
Menu Color Function
Green Current status
Magenta Protect
Blue Sequences
Pink Overrides
Cyan Source or Destination Preset (category selections)
Amber Misc selections.
Basic Panel Operations
Taking a Source to a Destination (Take)
The most basic operation of any router control panel consists of selecting a
router destination, followed by selecting a router source. This connects the
router source input signal to the router destination output.