Grass Valley Jupiter v.1.0 - Manual (Page 78)

78 Jupiter L-S Series Control Panels Installation and Operating Manual
Section 5 — L-S Series Panel Operation
LD16 Control Panel
For a summary of LD16 functions see page 24 .
Figure 31.
Override
Source
LD16 Control Panel
LD16 Operating Modes
The LD16 has two distinct operating modes, single destination and mul-
tiple destination.
• When operated in single destination mode, one destination is selected
for control and the display windows show the source for each defined
level of that destination (video, left audio, right audio, etc.). Breakaway
switching is supported.
• When operated in multiple destination mode, the LD16 can be used to
control multiple destinations, with the names of 16 of those destina-
tions (and the primary source for each) on display simultaneously. Mul-
tiple destinations can be switched to the same source with a single Take.
Breakaway switching is not supported in this mode (except via Over-
rides).
LD16 Single Destination Mode
In single destination mode, windows D1-D14 can show the status for each
level of one selected destination. The currently controlled destination is
shown under the
Active Dest legend in the D15 window.
Entering Single Destination Mode
1. Press Menu . The display windows will display various modes and the
associated active soft buttons will illuminate.
2. Press the D1 window Single Destination? soft button. Single destination
mode will be selected and the panel will exit the menu mode.
The active destination is shown in yellow in the D15 window. The level
names should appear, in amber, in the D1-D14. The D16 window will report
All Levels , or the highest numbered level that is currently selected.