Selecting a source (multiple destination mode) – Grass Valley Jupiter v.1.0 User Manual
Page 74
74
Jupiter L-S Series Control Panels Installation and Operating Manual
Section 5 — L-S Series Panel Operation
Selecting a Destination to Control (Multiple Destination Mode)
1.
Press the soft button next to the destination to be controlled so it is
illuminated. Use the
Up/Down
arrow buttons to view additional pages of
destinations.
2.
Multiple destinations on multiple pages can be selected, if desired.
Selecting a Source (Multiple Destination Mode)
Once destination(s) to be controlled are selected, the source is switched in
basically the same was as in Single Destination mode (see
(Single Destination Mode) on page 70
for detailed information).
Direct Category Button Method
1.
Press a Category (e.g., “VTR”) and unit number (e.g., “2”) button
combination.
2.
Press
Take
.
Page Selection Method
1.
Press
Menu
, then press the D4 window
Select Source?
soft button.
2.
The D1 window will display
Source?
in white. Sources will appear in
groups of four, in green, in the D1-D4 windows.
3.
Use the
Up/Down
arrow buttons to scroll through the available sources.
4.
Select the desired source by pressing its adjacent soft button.
5.
To execute the switch, press
Take
. The source will be switched to the
active destination(s).
Adding or Changing a Destination Soft Button Assignment
A destination may be added to any unused location in the D1-D4 displays.
One additional page will be available when adding destination assign-
ments. Destinations can also be changed or deleted.
Note
Destinations that have been defined in the panel's CP Output set using the
Jupiter Configuration Editor cannot be changed using the panel itself. If such
an attempt is made, the panel will display the following message: “????”
1.
Press
Menu
, then press the D3 window
Select Destination?
soft button. A
page of destination names will be displayed in the windows.
2.
Press the soft button next to the desired button location. Use the
Up/Down
arrow buttons if necessary to scroll through the pages of button
locations.