Grass Valley Jupiter v.1.0 - Manual (Page 36)

36 Jupiter L-S Series Control Panels Installation and Operating Manual
Section 2 — Hardware Installation
The SXY panels also have a cluster of 16 buttons on the right side that can
be used for category/number operation. See
Category Button Configuration
on page 36 for more information.
Button Configuration Overview
Source Button Configuration
Source button functions are assigned on a panel by creating a Jupiter CP
Input set of type CP-ESLAN. The set table in this Input set consists of a list
of button numbers and the name of the router input associated with each
button. The CP Input set is assigned to the panel using the MPK Devices
table.
For more information about button configuration, see CP Input and CP
Output Sets on page 51 .
Category Button Configuration
Category buttons exist on some panels, allowing the pre-selection of cate-
gories of sources or destinations. The categories can be customized, by cre-
ating a custom Jupiter CP Category set table. This CP Category set would
then be assigned to the CP Input set, which would in turn be assigned to
the panel using the MPK Devices table.
For more information about button configuration, see CP Input and CP
Output Sets on page 51 .
Level Button Configuration
Some panels include a cluster of eight buttons on the right side that can be
configured and labelled to select router levels. This can be done by creating
a suitable CP Level set which lists the router levels in the order they should
be available using the eight buttons. The CP Level set is assigned to the
panel using the MPK Devices table.
For more information about level button configuration, see CP Level Set on
page 51 .
Keycap Transparency Labels
A sheet of pre-cut transparency keycap labels, part no. 335835400, is avail-
able for use with Jupiter L-S Series control panels. The large labels measure
0.38 x 0.38 inches (9.65 x 9.65 mm). The small labels measure 0.3 x 0.3 inches
(7.62 x 7.62 mm). The font is Helvetica condensed oblique See
Figure 18 .