Grass Valley Jupiter v.1.0 - Manual (Page 73)

Jupiter L-S Series Control Panels Installation and Operating Manual 73
LD4 Control Panel
5. The level windows will indicate status of the first 4 levels of the
switcher.
• If Sticky Levels is off, after the Take all levels will automatically be
deselected (their buttons will turn off). If Sticky Levels is on, only
the levels involved in the last Take will remain selected.
Sticky Levels Mode (LD4 Panel)
If Sticky Levels mode is ON, the level(s) involved in a breakaway Take
remain selected for subsequent Takes. To turn on Sticky Levels mode:
1. Press Menu . The display windows will display various modes.
2. Press the Up/Down arrow buttons to display Panel Config? in the D4
window and press its soft button.
3. The Sticky Level menu will be displayed in the D1 window with its
current status (ON or OFF).
4. Press Take to toggle the state ON or OFF)
The panel will exit Menu mode and operate with the new state.
LD4 Multiple Destination Mode
Multiple destination mode, sometimes referred to as “multi-bus” mode, is
in effect when various destinations, in yellow, appear in the D1-D4 win-
dows; and level names (“video” etc.) do not appear.
This mode displays the top level (e.g., video) status for 4 destinations.
Additional pages of destinations each can be accessed using the
Up/Down
arrow buttons. Multiple destinations can be selected for single-Take
switching.
Entering Multiple Destination Mode
1. Press Menu . The display windows will display various modes.
2. Press the soft button for Multiple Destination? . The D1 window will
display the page number of the display (e.g. p00 ). The D1-D4 windows’
first line contains the status of 16 destinations.
• If destinations are undefined, the windows will show a series of dashes.
To define destinations, see
Adding or Changing a Destination Soft Button
Assignment on page 74 . You need to define at least one destination for
one of the D1-D16 windows to use multiple destination mode.