Symptom 3, Analysis, Solution – H3C Technologies H3C S7500E Series Switches User Manual
Page 90: Troubleshooting hwtacacs
4-2
3) UDP ports for authentication/authorization/accounting configured on the NAS are the same as
those configured on the RADIUS server.
4) The port numbers of the RADIUS server for authentication, authorization and accounting are
available.
Symptom 3
A user is authenticated and authorized, but accounting for the user is not normal.
Analysis
1) The accounting port number is not correct.
2) Configuration of the authentication/authorization server and the accounting server are not
correct on the NAS. For example, one server is configured on the NAS to provide all the
services of authentication/authorization and accounting, but in fact the services are provided by
different servers.
Solution
Check that:
1) The accounting port number is correctly set.
2) The
authentication/authorization server and the accounting server are correctly configured on
the NAS.
Troubleshooting HWTACACS
See
if you encounter an HWTACACS fault.