H3C Technologies H3C S7500E Series Switches - Manual (Page 33)

2-4
To do… Use the command… Remarks
Add a local user and enter local user
view
local-user user-name
Required
No local user exists by default.
Configure a password for the local
user
password { cipher | simple }
password
Optional
Place the local user to the state of
active or blocked
state { active | block }
Optional
When created, a local user is in
the state of active by default, and
the user can request network
services.
Set the maximum number of users
using the local user account
access-limit max-user-number
Optional
By default, there is no limit on the
maximum number of users using
the same local user account.
This limit is not effective for FTP
users.
Specify the service types for the local
user
service-type { ftp | lan-access |
{ ssh | telnet | terminal } * |
portal }
Required
By default, no service is
authorized to a local user.
Configure the binding attributes for the
local user
bind-attribute { call-number
call-number [ : subcall-number ] |
ip ip-address | location port
slot-number subslot-number
port-number | mac mac-address
| vlan vlan-id } *
Optional
By default, no binding attribute is
configured for a local user.
call-number is supported for
PPP users. ip, location, mac,
and vlan are supported for LAN
users. No binding attribute is
supported for other types of local
users.