H3C Technologies H3C S7500E Series Switches User Manual
Page 75
3-12
Figure 3-11 Portal server configuration
# Configure the IP address group.
Select Portal Service Management > IP Group from the navigation tree to enter the portal IP
address group configuration page. Then, click Add to enter the page for adding an IP address group,
as shown in
.
z
Input the name Portal_user
z
Set the start IP address to 192.168.1.1 and the end IP address to 192.168.1.255. Note that the IP
address of Host must be within this IP address group.
z
Select to not enable NAT
z
Click OK to finish the operation.
Figure 3-12 Add an IP address group
# Add a portal device.
Select Portal Service Management > Device from the navigation tree to enter the portal device
configuration page. Then, click Add to enter the page for adding a portal device, as shown in
.
z
Type the device name NAS.
z
Type the IP address of the access interface on the device, which is 192.168.1.70.