Figure 8-7 – H3C Technologies H3C S7500E Series Switches User Manual
Page 154
8-17
z
Set whether to enable IP address reallocation. Direction portal authentication is used in this
example, and therefore select No from the Reallocate IP drop-down list.
Figure 8-7 Add a portal device
# Associate the portal device with the IP address group.
As shown in
, in the device list on the portal device configuration page, click the icon
in the Port Group Information Management column of device Switch to enter the port group
configuration page.
Figure 8-8 Device list
On the port group configuration page, click Add to enter the page for adding a port group, as
shown in
. Perform the following configurations:
z
Type the port group name.
z
Select the configured IP address group. Note that the IP address used by the user to
access the network must be within this IP address group.
z
Use the default settings for other parameters.