Ssh client configuration examples, Network requirements, Configuration procedure – H3C Technologies H3C S7500E Series Switches User Manual
Page 225
11-21
Figure 11-12 SSH client configuration interface 2)
In the window shown in
, click Open to connect to the server. If the connection is normal,
you will be prompted to enter the username. After entering the correct username (client002), you can
enter the configuration interface of the server.
SSH Client Configuration Examples
When Switch Acts as Client for Password Authentication
Network requirements
z
As shown in
, Switch A (the SSH client) needs to log into Switch B (the SSH server)
through the SSH protocol.
z
The username of the SSH client is client001 and the password is aabbcc. Password
authentication is required.
Figure 11-13 Switch acts as client for password authentication
Configuration procedure
1) Configure the SSH server
# Generate the RSA key pairs.