H3C Technologies H3C S7500E Series Switches User Manual
Page 74
3-11
Select the User tab, and select Access User View > All Access Users from the navigation tree to
enter the All Access Users page. Then, click Add to enter the Add Access User page and perform
the following configurations:
z
Select the user or add a user named hello
z
Specify the account name as portal and configure the password
z
Select the access service Portal-auth/acct
z
Configure other parameters accordingly and click OK to finish the operation
Figure 3-10 Add an access user account
2) Configure the Portal server
# Configure the Portal server.
Log in to the iMC management platform and select the Service tab. Then, select Portal Service
Management > Server from the navigation tree to enter the portal server configuration page, as
shown in
z
Input the URL address of the portal authentication main page, in the format of http://ip:port/portal,
where ip and port are those configured during iMC UAM installation. Usually, the default setting of
port 8080 is used.
z
Click OK to finish the operation.