H3C Technologies H3C S7500E Series Switches - Manual (Page 36)

2-7
To do… Use the command… Remarks
Configure the authorization attributes for
the user group
authorization-attribute { acl
acl-number | callback-number
callback-number | idle-cut minute |
level level | user-profile profile-name |
vlan vlan-id | work-directory
directory-name } *
Optional
By default, no
authorization attribute is
configured for a user
group.
Displaying and maintaining local users and local user groups
To do… Use the command… Remarks
Display information about specified or all
local users on a distributed device
display local-user [ idle-cut { disable
| enable } | service-type { ftp |
lan-access | portal | ssh | telnet |
terminal } | state { active | block } |
user-name user-name | vlan vlan-id ]
[ slot slot-number ]
Available in any view
Display information about specified or all
local users on a distributed IRF member
device
display local-user [ idle-cut { disable
| enable } | service-type { ftp |
lan-access | portal | ssh | telnet |
terminal } | state { active | block } |
user-name user-name | vlan vlan-id ]
[ chassis chassis-number slot
slot-number ]
Available in any view
Display configuration information about a
specified user group or all user groups
display user-group [ group-name ] Available in any view
Configuring RADIUS Schemes
A RADIUS scheme specifies the RADIUS servers that the device can cooperate with and defines a set
of parameters that the device uses to exchange information with the RADIUS servers. There may be
authentication/authorization servers and accounting servers, or primary servers and secondary
servers. The parameters mainly include the IP addresses of the servers, the shared keys, and the
RADIUS server type.
RADIUS scheme configuration task list
Task Remarks
Creating a RADIUS scheme Required
Specifying the RADIUS authentication/authorization servers Required
Specifying the RADIUS accounting servers and relevant parameters Optional
Setting the shared keys for RADIUS packets Optional