H3C Technologies H3C S7500E Series Switches - Manual (Page 217)

11-13
Displaying and Maintaining SSH
To do… Use the command… Remarks
Display the source IP address or
interface currently set for the SFTP
client
display sftp client source Available in any view
Display the source IP address or
interface currently set for the SSH
client
display ssh client source Available in any view
Display SSH server status
information or session information
on an SSH server
display ssh server { status |
session }
Available in any view
Display the mappings between
SSH servers and their host public
keys saved on an SSH client
display ssh server-info Available in any view
Display information about a
specified or all SSH users on the
SSH server
display ssh user-information
[ username ]
Available in any view
Display the public keys of the local
key pairs
display public-key local { dsa |
rsa } public
Available in any view
Display the public keys of the SSH
peers
display public-key peer [ brief |
name publickey-name ]
Available in any view
For more information about the display public-key local and display public-key peer commands,
see Public Key Configuration Commands in the Security Command Reference.
SSH Server Configuration Examples
When Switch Acts as Server for Password Authentication
Network requirements
z As shown in Figure 11-4 , a local SSH connection is established between the host (the SSH client)
and the switch (the SSH server) for secure data exchange.
z Password authentication is required. The username and password are saved on the switch.