H3C Technologies H3C S7500E Series Switches - Manual (Page 193)

10-2
Task Remarks
Configuring a User Profile Required
Enabling a User Profile Required
Creating a User Profile
Configuration Prerequisites
Before creating a user profile, you need to configure authentication parameters. User profile supports
802.1X and portal authentications. You can select one of them to authenticate users based on the
actual networking when users access the network. However, you need to perform the related
configurations (for example, username, password, authentication scheme, domain and binding
between a user profile and user) on the client, the device and authentication server.
Creating a User Profile
Follow these steps to create a user profile:
To do… Use the command… Remarks
Enter system view system-view —
Create a user profile, and enter its
view
user-profile profile-name
Required
If the specified user profile already
exists, you will directly enter the
corresponding user profile view.
The configuration made in user
profile view takes effect when the
user profile is enabled and a user
using the user profile goes online.
Configuring a User Profile
After a user profile is created, you need to apply a QoS policy in user profile view to implement
restrictions on the online users.
Follow these steps to apply the QoS policy to online users:
To do… Use the command… Remarks
Enter system view system-view —