H3C Technologies H3C S7500E Series Switches - Manual (Page 194)

10-3
To do… Use the command… Remarks
Enter user profile view user-profile profile-name
Required
The configuration made in user
profile view takes effect when the
user-profile is activated and there
are online users.
Apply the QoS policy
qos apply policy policy-name
{ inbound | outbound }
Required
Use the inbound keyword to
apply the QoS policy to the traffic
received by the online users. Use
the outbound keyword to apply
the QoS policy to the traffic sent
by the online users.
z If a user profile is active, the QoS policy, except ACLs referenced in the QoS policy, applied to it
cannot be configured or removed. If the user profile is being used by online users, the referenced
ACLs cannot be modified either.
z The QoS policies applied in user profile view support only the remark, car, and filter actions.
z Do not apply an empty policy in user profile view because a user profile with an empty policy
applied cannot be activated.
z For information about the qos policy configuration commands, see QoS Policy Configuration
Commands in the ACL and QoS Command Reference.
Enabling a User Profile
A created user profile takes effect only after being enabled.
Follow these steps to enable a user profile:
To do… Use the command… Remarks
Enter system view system-view —
Enable a user profile user-profile profile-name enable
Required
A user profile is disabled by
default.