H3C Technologies H3C S7500E Series Switches - Manual (Page 216)

11-12
To do... Use the command… Remarks
Enter system view system-view —
Disable first-time authentication
support
undo ssh client first-time
Required
By default, first-time authentication
is supported on a client.
Configure the server host public
key
See Configuring a Client Public
Key
Required
The method for configuring the
server host public key on the client
is similar to that for configuring
client public key on the server.
Specify the host public key name
of the server
ssh client authentication server
server assign publickey keyname
Required
Establishing a Connection Between the SSH Client and the Server
Follow these steps to establish the connection between the SSH client and the server:
To do... Use the command… Remarks
For an IPv4
server
ssh2 server [ port-number ]
[ identity-key { dsa | rsa } |
prefer-ctos-cipher { 3des | aes128 |
des } | prefer-ctos-hmac { md5 |
md5-96 | sha1 | sha1-96 } | prefer-kex
{ dh-group-exchange | dh-group1 |
dh-group14 } | prefer-stoc-cipher
{ 3des | aes128 | des } |
prefer-stoc-hmac { md5 | md5-96 |
sha1 | sha1-96 } ] *
Establish a
connection
between the
SSH client and
the server, and
specify the
public key
algorithm,
preferred
encryption
algorithm,
preferred HMAC
algorithm and
preferred key
exchange
algorithm
For an IPv6
server
ssh2 ipv6 server [ port-number ]
[ identity-key { dsa | rsa } |
prefer-ctos-cipher { 3des | aes128 |
des } | prefer-ctos-hmac { md5 |
md5-96 | sha1 | sha1-96 } | prefer-kex
{ dh-group-exchange | dh-group1 |
dh-group14 } | prefer-stoc-cipher
{ 3des | aes128 | des } |
prefer-stoc-hmac { md5 | md5-96 |
sha1 | sha1-96 } ] *
Required
Use either command in
user view.