H3C Technologies H3C S7500E Series Switches - Manual (Page 214)

11-10
Follow these steps to set the SSH management parameters:
To do… Use the command… Remarks
Enter system view system-view —
Enable the SSH server to support
SSH1 clients
ssh server compatible-ssh1x
enable
Optional
By default, the SSH server
supports SSH1 clients.
Set the RSA server key pair
update interval
ssh server rekey-interval hours
Optional
0 by default, that is, the RSA
server key pair is not updated.
Set the SSH user authentication
timeout period
ssh server
authentication-timeout
time-out-value
Optional
60 seconds by default
Set the maximum number of SSH
authentication attempts
ssh server
authentication-retries times
Optional
3 by default
Authentication will fail if the number of authentication attempts (including both publickey and password
authentication) exceeds that specified in the ssh server authentication-retries command.
Configuring the Device as an SSH Client
SSH Client Configuration Task List
Complete the following tasks to configure an SSH client:
Task Remarks
Specifying a Source IP address/Interface for the SSH
Client
Optional
Configuring Whether First-time Authentication is
Supported
Optional
Establishing a Connection Between the SSH Client
and the Server
Required