H3C Technologies H3C S7500E Series Switches User Manual
Page 87
3-24
The HWTACACS server in this example runs ACSv4.0.
Add a user named tester on the HWTACACS server and configure advanced attributes for the user as
follows:
z
Select Max Privilege for any AAA Client and set the privilege level to level 3. After these
configurations, the user needs to use the password enabpass when switching to level 1, level 2,
or level 3.
z
Select Use separate password and specify the password as enabpass.
Figure 3-22 Configure advanced attributes for the Telnet user
3) Verify the configuration
After the configuration above, the Telnet user should be able to telnet to the switch and use username
test@bbb and password aabbcc to enter the user interface of the switch, and access all level 0
commands.
Trying 192.168.1.70 ...