Assign to, Standard, Non standard blocking – Ensemble Designs 9430 Flexible Matrix Router for 3G / HD / SD / ASI User Manual
Page 84: Standard 84 non standard blocking
www.ensembledesigns.com
Page 84
Avenue 9430 Flexible Matrix Router
Installation, Configuration and Operations Guide
The configuration controls for the Clean Switches
are as follows:
Assign To
Assign the Clean Switch to any of the Sources
(Input Ports) or Destinations (Output Ports) that
have been configured in the Port Configuration
menu. Only the currently available Sources and
Destinations will be presented as choices in this
menu. Because only one CS can be assigned
to any given Source or Destination, the list
presented will not include any ports that are
already assigned to other Clean Switches. In order
to change assignments to move a port from
one CS to another CS, you must first release the
original assignment by selecting “None.”
Standard
Select the desired operating format and frame
rate. Only input signals matching that Standard
will be processed by the Clean Switch.
If a source in a different format is selected, the CS
will be bypassed and the source will be switched
to the output without any processing. This applies
for both Input and Output configurations.
Non Standard Blocking
When Non Standard Inputs are blocked, the
output of the Clean Switch will go to Black when
a differing input is presented.