Ensemble Designs 9430 Flexible Matrix Router for 3G / HD / SD / ASI - Manual (Page 30)

www.ensembledesigns.com Page 30
Avenue 9430 Flexible Matrix Router Installation, Configuration and Operations Guide
Installing the BNC Plastic Overlays
On the rear of the Avenue frame, install the BNC plastic overlays provided onto the corresponding
group of rear BNC connectors associated with the Router location.
The 9440 modules have two plastic overlays, one for the Expansion 1 position and one for the
Expansion 2 position. As an orientation aid, the bottom of each 9440 plastic overlay is marked with an
arrow that should be pointing toward the 9430 that sits between the 9440s.
Note that the plastic overlays have optional adhesive backings for securing them to the frame. Use
of the adhesive backing is only necessary if you would like the location to be permanent and is not
recommended if you need to change module locations.
9440 Router
Expansion 1
I/O Port 11
I/O Port 16
I/O Port 20
9430
I/O Port 19
I/O Port 12
I/O Port 15
I/O Port 14
I/O Port 13
I/O Port 18
I/O Port 17
9430 Router
Input Port 1
Output Port 2
Output Port 1
(Fail-safe)
Input Port 4
Input Port 8
Input Port 7
Input Port 3
Input Port 2
Input Port 6
Input Port 5
Network/Serial
9440 Router
Expansion 2
I/O Port 21
I/O Port 26
I/O Port 30
9430
I/O Port 29
I/O Port 22
I/O Port 25
I/O Port 24
I/O Port 23
I/O Port 28
I/O Port 27
BNC plastic overlays on the rear of the frame