Ensemble Designs 9430 Flexible Matrix Router for 3G / HD / SD / ASI User Manual
Page 108
www.ensembledesigns.com
Page 108
Avenue 9430 Flexible Matrix Router
Installation, Configuration and Operations Guide
Table 3
Desired automation Src
number
Src Name
Router port number
1
-
-
2
Server 6
Input Port 3
3
Server 4
Input Port 4
4
-
-
5
Studio 3
Input Port 2
6
-
-
7
Network Feed
Input Port 1
Table 4
Desired automation Dest
number
Dest name
Router port number
1
-
-
2
-
-
3
Transmitter
Output Port 2
4
-
-
5
-
-
6
-
-
7
-
-
8
Microwave
Output Port 1
Note:
In this example, we are assuming a protocol that numbers sources and destinations
beginning with the number 1. Some protocols begin numbering at zero (e.g., the
Grass Valley TEN-XL ASCII Protocol and the Generic ASCII protocol).
We can now use these lists to create a Profile in the 9430 Router that numbers the sources and
destinations to match the desired automation numbering scheme.
Using the 9430’s Profile Editor to arrange the order of the sources and destinations in their respective
columns, and inserting spaces at the appropriate places, we can create a Profile with the numbering
order that the automation system requires. The Profile to accomplish this is illustrated in Figure 1.