Ensemble Designs 9430 Flexible Matrix Router for 3G / HD / SD / ASI - Manual (Page 112)

www.ensembledesigns.com Page 112
Avenue 9430 Flexible Matrix Router Installation, Configuration and Operations Guide
6.2.2 Protocol Selection
From the Protocol drop-down control, select which protocol the router and automation system will
use to communicate. The details of the various protocols are discussed in Section 7, “Protocols,” in this
appendix.
6.2.3 Profile Selection
From the Profile drop-down control, select the Profile that will determine the automation numbering
scheme. (If you have not set up a Profile, refer to Section 5, “Understanding Profiles,” in this appendix.)
7 Protocols
The 9430 Router supports multiple protocols to allow crosspoint switching from external controllers.
The supported protocols are these:
• GV TEN-XL ASCII Protocol
• GV Performer ASCII Protocol
• Generic ASCII Protocol
For installations that already support one of these protocols, choosing the same protocol can minimize
programming changes to the automation system when installing the 9430 Router.
These protocols are presented in the subsections below.
7.1 GV TEN-XL ASCII Protocol
The Grass Valley TEN-XL ASCII Protocol is a serial protocol used by TEN-XL Routing Switchers. For
installations that already support this protocol, this is a good choice to minimize programming
changes to the automation system.
The implementation of this protocol has been adapted as appropriate to reflect the features in the
9430 Router.