Ensemble Designs 9430 Flexible Matrix Router for 3G / HD / SD / ASI - Manual (Page 64)

www.ensembledesigns.com Page 64
Avenue 9430 Flexible Matrix Router Installation, Configuration and Operations Guide
Examples of Control Points
• 5830 Router Control Panel
• Laptops, iPads and other computers using a web browser
• External control using serial protocols
Configuring the 5830 Router Control Panel
Configuring the Router Control Panel involves:
• Connecting it to the network with an Ethernet cable,
• Turning on the power, (unless it is being powered using Power over Ethernet, or PoE),
• Determining whether to use a static (the default) or dynamic IP address,
• Granting it access to the Router, and
• Assigning it a Profile.
Note: Please connect the Router Control Panel to the network before turning on its power.
The Router Control Panel can be powered using PoE (if you have a PoE switch
upstream from the Panel), or it can be powered by the power supply included with
each Panel.
Assigning an IP Address to the 1RU Control Panel
The 5830 1RU Control Panel comes from the factory with the following defaults:
• Static IP Address: 192.168.1.101
• Subnet: 255.255.255.0
You can change this configuration by accessing the 5830 from a web browser. To do this, you will need
a computer whose network configuration is compatible with the 5830 defaults. In general, this will
require that the computer be connected to the same Ethernet switch as the 5830. A WiFi connection
will work only if it provides access to the 5830 subnet. The computer will need an address in the range
of 192.168.1.0 to 192.168.1.254 in order to connect to the 5830.
Once you can browse to the 5830, you will see the following Settings > General window: