Ensemble Designs 9430 Flexible Matrix Router for 3G / HD / SD / ASI - Manual (Page 68)

www.ensembledesigns.com Page 68
Avenue 9430 Flexible Matrix Router Installation, Configuration and Operations Guide
Configuring Other Control Points
For control points other than Router Control Panels, such as iPads and web browsers, there are two
methods for adding them. One method is to request access from a Control Point. The other method is
to assign an IP address to a Control Point. These two methods are described as follows:
First Method: Requesting Access from a Control Point
1. From the desired control point, whether from an iPad or from a computer web browser, enter the
Router's IP address (for example, http://10.123.222.240) into the browser's address field. A browser
window displays indicating that a Control Point is Needed.
2. Enter your desired Control Point name in the Control Point Name field, then click Request. The
browser window indicates that your Control Point has been disabled. Your request has become a
Pending Authorization item for the administrator.
Second Method: Assigning an IP Address as a Control Point
To assign the IP address of a device to create a Control Point:
1. Navigate to the IP address of the Router.
2. In the upper left area, click Settings. The Settings page displays.
3. From the left navigation panel, click Control Points. The Control Points page displays.
4. Under the heading Add Control Points, indicate a name in the Name field.
5. Select a profile from the Profile drop-down control.
6. Enter the IP address for the device into the Address field.
7. Click Add. The Control Points page refreshes to show that the newly assigned Control Point is
enabled.
Approving Pending Authorizations
To approve an authorization request:
1. Click Settings in the upper left area of the browser.
2. Click Control Points in the left navigation panel. The Control Points page displays.
3. Under Pending Authorizations, you will see the request that was just submitted.
4. For this new request, select a Profile from the drop-down control.
5. Click Authorize. The Control Points page refreshes and now includes the newly requested Control
Point.
Note: In order to access Settings, you must have administrator access. See Security and
Administrative Access to Settings on page 53 for more details.