Ensemble Designs 9430 Flexible Matrix Router for 3G / HD / SD / ASI - Manual (Page 42)

www.ensembledesigns.com Page 42
Avenue 9430 Flexible Matrix Router Installation, Configuration and Operations Guide
Method Two: For Customers Not Using Avenue Touch Screen or Avenue PC
Temporarily Changing IP Address on Controlling Computer
When you initially power up the 9430 as received from the factory, it will take the self-assigned static IP
address of 192.168.1.100.
In order to connect initially with the Router to assign it an IP address that suits your own network, you
must first temporarily change the controlling computer’s IP address so that it is in the same range as
the 9430’s default IP address.
For example, you could use the following settings temporarily on the controlling computer:
• IP address: 192.168.1.10
• Subnet mask: 255.255.255.0.
Consideration
Depending on how your computer network is configured, it may be simpler to use a computer, such
as a laptop, that is outside of the network solely for the purpose of assigning the Router its new IP
address. This may be simpler than temporarily changing the IP address of the controlling computer
that is within your network.
Instructions for Temporarily Changing the IP Address for Mac and Windows XP
For the Mac
1. From the dock, click the System Preferences icon.
The System Preferences window displays.
2. Click the Network icon.
The Network window displays.
3. From the Configure drop-
down control, select
Manually.