Ensemble Designs 9430 Flexible Matrix Router for 3G / HD / SD / ASI - Manual (Page 49)

www.ensembledesigns.com Page 49
Avenue 9430 Flexible Matrix Router Installation, Configuration and Operations Guide
Establishing Initial Control Point and Profile for
Administrator Functions
Now that you have set the Router’s IP address and subnet mask in a manner that suits your network
environment, you can start the configuration process. From the controlling computer, connect to the
9430 to establish an initial Control Point for administrator functions.
To Create an Initial Control Point
1. Navigate to the 9430’s new IP address with your browser. The Control Point Needed window
displays.
2. From the Control Point Needed window, enter the name you want to use to refer to the initial
Control Point (for example, “Router Admin”).
3. Click Request. The message “Control Point Disabled” displays.
4. Click System Settings in the upper left part of the browser window. The Settings > General
window displays.