Ensemble Designs 9430 Flexible Matrix Router for 3G / HD / SD / ASI - Manual (Page 125)

www.ensembledesigns.com Page 125
Avenue 9430 Flexible Matrix Router Installation, Configuration and Operations Guide
Response: In Hex 53 3A 30 33 2C 39 0D 0A
53 3A 30 31 2C 37 0D 0A
53 3A 30 32 2C 35 0D 0A
In ASCII S:03,9
S:01,7
S:02,5
Crosspoint Status Command
Description: This command requests the crosspoint status of the specified destination.
Syntax: @X?
@ ASCII ‘@’ (40H) followed by ASCII space character ‘ ’ (20H).
Identifies the start of a command.
X? ASCII ‘X’ followed by ASCII ‘?’.
Identifies this as a Crosspoint Status command.
The 9430 Router only supports level 0.
Must be ASCII digit ‘0’.
Destination number.
Up to 4 characters (including leading zeros) may be used to
specify the destination.
Any valid ASCII hex digits. (E.g. ‘0’ to ‘9’ or ‘A’ to ‘F’).
ASCII carriage return character (0DH).
Example: Get the status of Destination 7. Level 0 must be specified. Assume that the router
reports Source 6 is selected on Destination 7.
Request: In Hex 40 20 58 3F 30 37 0D
In ASCII @ X?07
Response: In Hex 53 3A 30 37 2C 36 0D 0A
In ASCII S:07,6