Ensemble Designs 9430 Flexible Matrix Router for 3G / HD / SD / ASI - Manual (Page 40)

www.ensembledesigns.com Page 40
Avenue 9430 Flexible Matrix Router Installation, Configuration and Operations Guide
2. From the IP Adr menu, enter the IP address you want to use that is compatible with your own
network. The simplest method is to touch each number field, using the keypad to enter the new
numbers. For example, you may want to change the IP address to something like the following:
• 10.123.222.100
Assigning the Router a New IP Address and Subnet Mask
When you initially power up the 9430 as received from the factory, it will take the self-assigned static
IP address of 192.168.1.100. The 9430 needs to be configured for a manually assigned static IP address
and subnet mask that are compatible with your network environment. The next section of this chapter
describes two methods for assigning a new static IP address and subnet mask to the 9430.
1. The first method is for customers who are using either Avenue Touch Screen or Avenue PC to
control the Avenue Frame.
2. The second method is for customers who have neither Avenue Touch Screen nor Avene PC.
These are general instructions. We recommend that you consult your IT staff if you are uncertain about
any of these network configuration settings.
The Touch Screen interface showing the IP address of
the Router as received from the factory.
Method One: For Customers Using Avenue Touch Screen or Avenue PC
To Set the IP Address
1. From the Avenue Frame, select the 9430 module from the Touch Screen. The 9430 menus display.
Initially Connecting to the Router
Establishing Network Connectivity between Controlling Computer and
9430
Please review the section Router Control Connections on page 32 if necessary to make sure you
have network connectivity between your controlling computer and the 9430. It is critical that the
controlling computer be networked to the “Y” adaptor cable which connects to the HD-15 connector
specific to the slot in the frame where the 9430 is installed.