Westermo PMI-110-F2G - Manual (Page 87)

83
Switch(config‐super‐ring‐plus)# port cost 100 200
Set path cost success.
Rapid Dual Homing Switch(config‐multiple‐super‐ring)# rapid‐dual‐homing enable
Switch(config‐multiple‐super‐ring)# rapid‐dual‐homing disable
Switch(config‐multiple‐super‐ring)# rapid‐dual‐homing port
IFLIST Interface name, ex: fastethernet1 or gi8
auto‐detect up link auto detection
IFNAME Interface name, ex: fastethernet1 or gi8
Switch(config‐multiple‐super‐ring)# rapid‐dual‐homing port fa3,fa5‐6
set Rapid Dual Homing port success.
Note: auto‐detect is recommended for dual Homing..
Ring Info
Ring Info
Switch# show multiple‐super‐ring [Ring ID]
[Ring1] Ring1
Current Status : Disabled
Role : Disabled
Ring Status : Abnormal
Ring Manager : 0000.0000.0000
Blocking Port : N/A
Giga Copper : N/A
Configuration :
Version : Rapid Super Ring
Priority : 128
Ring Port : fa1, fa2
Path Cost : 100, 200
Dual‐Homing II : Disabled
Statistics :
Watchdog sent 0, received 0, missed 0
Link Up sent 0, received 0
Link Down sent 0, received 0
Role Transition count 0
Ring State Transition count 1
Ring ID is optional. If the ring ID is typed, this command will only display
the information of the target Ring.