Westermo PMI-110-F2G - Manual (Page 127)

Event Types can be divided into two basic groups:
System Events and Port Events. System Events
are related to the overall function of the switch,
whereas Port Events related to the activity of
specific ports
Once you finish configuring the settings, click on Apply
to apply your configuration.
System Event Selection Warning Event is sent when…..
Device Cold Start Power is cut off and then reconnected.
Device Warm Start Reboot the device by CLI or Web UI.
Authentication failure An incorrect password, SNMP Community String is entered .
Time Synchronize Failure Accessing to NTP Server is failure.
Power 1/ 2 Failure The power input is failure.
Fault Relay The DO/Fault Relay is on.
Ring Topology Changes Master of Super Ring has changed or backup path is activated.
SFP The SFP transceiver’s state is abnormal.
Port Event Selection Warning Event is sent when…..
Link‐Up The port is connected to another device
Link‐Down The port is disconnected (e.g. the cable is pulled out, or the opposing devices
turns down)
Both The link status changed.
PoE Event Selection Warning Event is sent when…..
Diable Port PoE function is disabled
Enable Port PoE function is enabled.
123