Westermo PMI-110-F2G - Manual (Page 54)

(100 Half), 1000M Full Duplex (1000 Full), 1000M Half Duplex (1000 Half).
The default mode is Auto Negotiation mode.
In Flow Control column, “Symmetric” means that you need to activate the flow
control function of the remote network device in order to let the flow control of
that corresponding port on the switch to work. “Disable” means that you don’t
need to activate the flow control function of the remote network device, as the
flow control of that corresponding port on the switch will work anyway.
Description: the description of interface. It supports maximum characters length
is 130.
Once you finish configuring the settings, click on Apply to save the configuration .
Technical Tips: If both ends are not at the same speed, they can’t link with each
other. If both ends are not in the same duplex mode, they will be connected by
half mode
.
4.3.2 Port Status
Port Status shows you current port status.
The description of the columns is as below:
SFP Vendor: Vendor name of the SFP transceiver you plugged.
Wavelength: The wave length of the SFP transceiver you plugged.
Distance: The distance of the SFP transceiver you plugged.
Reload: reload the all port information.
Scan all: scan the SFP transceiver and display.
Eject: Eject the SFP transceiver that you have selected. You can eject one port or
eject all by click the icon “Eject All”.
50