Westermo PMI-110-F2G - Manual (Page 38)

private MIB in MIB browser. (Note: When you attempt to view private MIB, you
should compile private MIB files into your MIB browser first.)
System Description: the name of this managed product.
Firmware Version: Display the firmware version installed in this device.
MAC Address: Display unique hardware address (MAC address) assigned by the
manufacturer.
Once you finish the configuration, click on Apply to apply your settings.
Note: Always remember to select Save to save your settings. Otherwise, the
settings you made will be lost when the switch is powered off.
4.2.2 Admin Password
You can change the user name and the password here to enhance security
User name: You can key in new user name here. The default setting is admin.
Password: You can key in new password here. The default setting is westermo.
Confirm Password: You need to type the new password again to confirm it.
Once you finish configuring the settings, click on Apply to apply your
configuration
.
4.2.3 IP Configuration
This function allows users to configure the switch’s IP address settings. Below
figure is the UI of IP configuraation.
34