Westermo PMI-110-F2G - Manual (Page 64)

Detection Status : Valid
Classification : N/A
Priority : Highest
Output Power : 0.0 Watts, Voltage : 0.0 V, Current : 0 mA
Watts
ter level : N/A
Power Budget :
Budget : 32.0 Watts, effective 0
Warning wa
Utilization : 0 %
Event : Normal
Syntax show poe pd_detect
Parameters ‐‐
Command Mode Enable mode
Description d status detection. Display the status of p
Examples
n
.2.100
Target IP : 192.168.2.200
Cycle Time : 20
68.2.20
Switch# show poe pd‐detect
PD Status Detectio
Status : Enabled
Host 1 :
Target IP : 192.168
Cycle Time : 10
Host 2 :
Host 3 :
Target IP : 192.168.2.15
Cycle Time : 30
Host 4 :
Target IP : 192.1
Cycle Time : 40
Syntax show poe schedule IFNAME
Parameters IFNAME : interface name
Command Mode Enable mode
Description interface. Display the status of schedule of
Examples w poe schedule fa1
: Disable
3,4,5,6,7,8,19,20,21,22,23
,7,8,19,20,21,22,23
,7,8,19,20,21,22,23
3,4,5,6,7,8,19,20,21,22,23
ay : 0,1,2,3,4,5,6,7,8,19,20,21,22,23
23
:
4,15,16,17,18,19,20
Switch# sho
Interface fastethernet1
POE Schedule
Status
Weekly Schedule :
Sunday : 0,1,2,
Monday : 0,1,2,3,4,5,6
,5,6 Tuesday : 0,1,2,3,4
Wednesday : 0,1,2,
Thursd
Friday : 0,1,2,3,4,5,6,7,8,19,20,21,22,
Saturday
0,1,2,3,4,5,6,7,8,9,10,11,12,13,1
Syntax poe powering‐mode 802.3af/forced
Parameters r if and only if the attached PD comply with
d
802.3af: deliver powe
IEEE 802.3af
forced: deliver power no maater what PD attache
Command Mode Interface mode
Description Set the Powring mode of PoE
60