Westermo PMI-110-F2G - Manual (Page 65)

Examples
owering mode
EX 1: Set 802.3af powring mode
Switch(config)# poe powering‐mode 802.3af
EX 2: Set forced p
Switch(config)# poe powering‐mode forced
Syntax poe powering‐mode 802.3at 2‐event/lldp
Parameters 2‐event: deliver power if and only if the attached PD comply with
IEEE 802.3at physical layer classification
omply with IEEE
layer classification
lldp: deliver power if and only if the attached PD c
802.3at data link
Command Mode Interface mode
Description Set the Powring mode of PoE
Examples mode
2‐event
EX 1: Set 802.3at 2‐event powring
Switch(config)# poe powering‐mode 802.3at
EX 2: Set 802.3at lldpforced powering mode
Switch(config)# poe powering‐mode 802.3at lldp
Syntax poe control‐mode user/schedule
Parameters user: user mode
schedule: schedule mode
Command Mode terface mode In
Description Set the control mode of port
Examples Set PoE port 2 to user mode.
EX 1:
Switch(config)# interface fa2
Switch(config‐if)# poe control‐mode user
Set PoE port 2 to schedule mode.
EX 2:
Switch(config‐if)# poe control‐mode schedule
Syntax poe user enable/disable
Parameters enable: enable port in user mode
disable: disable port in user mode
Command Mode Interface mode
Description port in user mode.
e into affect when the control mode
Enable/Disable the PoE of the
If in schedule mode, it will com
changes to user mode.
Examples To enable the PoE function in user
(config‐if)# poe user enable
mode
Switch
To disable the PoE function in user mode
r disable Switch(config‐if)# poe use
Syntax poe type TYPE
Parameters TYPE : port type string with max 20 characters
Command Mode Interface mode
Description Set the port type string.
Examples Set the type string to “IPCam‐1.
Switch(config‐if)# poe type IPCam‐1
Syntax poe budget [POWER]
Parameters POWER : 0.4 – 30
Command Mode Interface mode
Description Set the port budget.
61