Westermo PMI-110-F2G - Manual (Page 117)

113
4.10.4 CLI Commands of the SNMP
Command Lines of the SNMP configuration
Feature Command Line
SNMP Community
Read Only Community Switch(config)# snmp‐server community public ro
community string add ok
Read Write Community Switch(config)# snmp‐server community private rw
community string add ok
SNMP Trap
Enable Trap Switch(config)# snmp‐server enable trap
Set SNMP trap enable ok.
SNMP Trap Server IP
without specific
community name Switch(config)# snmp‐server host 192.168.2.33
SNMP trap host add OK.
SNMP Trap Server IP with
version 1 and community Switch(config)# snmp‐server host 192.168.2.33 version 1 private
SNMP trap host add OK.
Note: private is the community name, version 1 is the SNMP
version
SNMP Trap Server IP with
version 2 and community Switch(config)# snmp‐server host 192.168.2.33 version 2 private
SNMP trap host add OK.
Disable SNMP Trap Switch(config)# no snmp‐server enable trap
Set SNMP trap disable ok.
Display Switch# sh snmp‐server trap
SNMP trap: Enabled
SNMP trap community: public
Switch# show running‐config
.......
snmp‐server community public ro
snmp‐server community private rw
snmp‐server enable trap
snmp‐server host 192.168.2.33 version 2 admin
snmp‐server host 192.168.2.33 version 1 admin
……..