Westermo PMI-110-F2G - Manual (Page 122)

Tx period: the time interval of authentication request.
Supplicant Timeout: the timeout for the client authenticating
Sever Timeout: The timeout for server response for authenticating.
Once you finish configuring the settings, click on Apply to apply your
configuration.
Click Initialize Selected to set the authorize state of selected port to initialize
status.
Click Reauthenticate Selected to send EAP Request to supplicant to request
reauthentication.
Click Default Selected to reset the configurable 802.1x parameters of selected
port to the default values.
4.11.3.3 802.1X Port Status
Here user can observe the port status for Port control status, Authorize Status,
Authorized Supplicant and Oper Control Direction each port.
118