Westermo PMI-110-F2G - Manual (Page 51)

Note: By typing clock timezone ?, you can see the timezone list.
Then choose the number of the timezone you want to select.
Daylight Saving
Switch(config)# clock summer‐time 4 0 2 12:00 4 0 3 12:00
Clock summer‐time <start week of month > <start weekday>
<start month> <start Hour:Min> <end week of month> <end
weekday> <end month> <end Hour:Min>
Start week of month: 1~5
Start weekday: 0 (Sunday) ~6 (Saturday)
Month: 1 (Jan) ~12 (Dec)
IEEE 1588 Switch(config)# ptpd run
preferred‐clock Preferred Clock
slave Run as slave
Display
SWITCH# sh ntp associations
Network time protocol
Status : Disabled
Primary peer : N/A
Secondary peer : N/A
SWITCH# show clock
Sun Jan 1 04:14:19 2006 (GMT) Greenwich Mean Time: Dublin,
Edinburgh, Lisbon, London
SWITCH# show clock timezone
clock timezone (26) (GMT) Greenwich Mean Time: Dublin,
Edinburgh, Lisbon, London
DHCP Server
DHCP Server
configuration
Enable DHCP Server on PMI Switch
Switch#
Switch# configure terminal
Switch(config)# router dhcp
Switch(config‐dhcp)# service dhcp
Configure DHCP network address pool
Switch(config‐dhcp)#network 50.50.50.0/4 ‐(
network/mask)
Switch(config‐dhcp)#default‐router 50.50.50.1
Lease time configure
Switch(config‐dhcp)#lease 300 (300 sec)
DHCP Relay Agent
Enable DHCP Relay Agent
Switch#
Switch# configure terminal
Switch(config)# router dhcp
Switch(config‐dhcp)# service dhcp
Switch(config‐dhcp)# ip dhcp relay information option
Enable DHCP Relay policy
Switch(config‐dhcp)# ip dhcp relay information policy replace
drop Relay Policy
keep Drop/Keep/Replace option82 field
replace
Show DHCP server
information
Switch# show ip dhcp server statistics
Switch# show ip dhcp server statistics
DHCP Server ON
47