Westermo PMI-110-F2G - Manual (Page 63)

4.4.4 Command Line for PoE control
Syntax show poe system
Parameters ‐‐
Command Mode Enable mode
Description Display the status of the PoE system.
Examples Switch> enable
Switch# show poe system
ble
PoE Hardward : Normal
PoE Input Voltage : 47.700 V
0 Watts
wer Budget :
Budget : 120 Watts
r level : N/A
PoE System
PoE Admin : Ena
Output power : 0.0
Po
Warning wate
Utilization : 0 %
Event : Normal
Syntax show poe interface IFNAME
Parameters IFNAME : interface name
Command Mode Enable mode
Description ce. Display the PoE status of interfa
Examples
interface fa1
OE Port 1)
3af
Off
Switch> enable
Switch# show poe
Interface fastethernet1 (P
Control Mode : User (Disable)
Powering Mode : 802.
Operation Status :
59