Westermo PMI-110-F2G - Manual (Page 131)

linkup Switch link up event
all Switch all event
authentication Authentication failure event
di Switch di event
fault‐relay Switch fault relay event
power Switch power failure event
sfp‐ddm Switch SFP DDM abnormal event
super‐ring Switch super ring topology change event
time‐sync Switch time synchronize event
Ex: Cold Start event Switch(config)# warning‐event coldstart
Set cold start event enable ok.
Ex: Link Up event Switch(config)# warning‐event linkup
[IFNAME] Interface name, ex: fastethernet1 or gi8
Switch(config)# warning‐event linkup fa5
Set fa5 link up event enable ok.
Display Switch# show warning‐event
Warning Event:
Cold Start: Enabled
Warm Start: Disabled
Authentication Failure: Disabled
Link Down: fa4‐5
Link Up: fa4‐5
Power Failure:
Super Ring Topology Change: Disabled
Fault Relay: Disabled
Time synchronize Failure: Disable
SFP DDM: Enabled
DI:DI1
Syslog Configuration
Local Mode Switch(config)# log syslog local
Server Mode Switch(config)# log syslog remote 192.168.2.200
Both Switch(config)# log syslog local
Switch(config)# log syslog remote 192.168.2. 200
Disable Switch(config)# no log syslog local
SMTP Configuration
SMTP Enable Switch(config)# smtp‐server enable email‐alert
SMTP Email Alert set enable ok.
Sender mail Switch(config)# smtp‐server server 192.168.2. 200
ACCOUNT SMTP server mail account, ex: [email protected]
Switch(config)# smtp‐server server 192.168.2. 200 [email protected]
SMTP Email Alert set Server: 192.168.2. 200 , Account:
[email protected] ok.
Receiver mail Switch(config)# smtp‐server receipt 1 [email protected]
SMTP Email Alert set receipt 1: [email protected] ok.
Authentication with
username and password Switch(config)# smtp‐server authentication username admin password
westermo
SMTP Email Alert set authentication Username: admin, Password:
westermo
Note: You can assign string to username and password.
Disable SMTP Switch(config)# no smtp‐server enable email‐alert
SMTP Email Alert set disable ok.
Disable Authentication Switch(config)# no smtp‐server authentication
SMTP Email Alert set Authentication disable ok.
Dispaly Switch# sh smtp‐server
SMTP Email Alert is Enabled
127