Westermo PMI-110-F2G - Manual (Page 47)

Click on the Folder icon to select the target file you want to backup/restore.
Note that the folders of the path to the target file do not allow you to input space
key.
Type the IP address of TFTP Server IP. Then click on Backup/Restore.
Note: point to the wrong file will cause the entire configuration missed
4.2.7 Firmware Upgrade
In this section, you can update the latest firmware for your switch. Westermo
provides the latest firmware in Westermo Web site. The new firmware may
include new features, bug fixes or other software changes. We’ll also provide the
release notes for the update as well. For technical viewpoint, we suggest you use
the latest firmware before installing the switch to the customer site.
Note that the system will be automatically rebooted after you finished
upgrading new firmware. Please remind the attached network users before you
perform this function.
There are 2 modes for users to backup/restore the configuration file, Local File
mode and TFTP Server mode.
Local File mode: In this mode, the switch acts as the file server. Users can browse
the target folder and then type the file name to backup the configuration. Users
also can browse the target folder and select the existed configuration file to
restore the configuration back to the switch. This mode is only provided by Web
UI while CLI is not supported.
TFTP Server mode: In this mode, the switch acts as the TFTP client. Before you do
so, make sure that your TFTP server is ready. And then please type the IP address
of TFTP Server IP address. This mode can be used in both CLI and Web UI.
TFTP Server IP Address: You need to key in the IP address of your TFTP Server
here.
43